- Multi-Rail sets
- Multi-Rail System
Multi-Rail RH
Description
Flexible multi-clamping vise system for higher productivity. Multi-Rail RH adapts easily to various workpiece sizes, and the components of these systems can be reused and reconfigured quickly and easily for a variety of applications and workpieces.
Technical data
- Compatible with F-series clamp modules
- Maximum clamping force: up to 10 tons
- Serration pitch: 2.5 mm
- Profile size: 60 × 60 mm
- Locating holes: 2 × Ø16 mm H7
- Available lengths: 400–800 mm
- Accuracy (serration to positioning hole): ±0.02 mm
Multi-Rail RH Sets
Installation: Please note that each Multi-Rail set shown on this page includes the bolt set required for installation on a grid platform.
When installing to a T-slot table, separate installation components are required. These can be found here and here, and are available to order separately.
| Set Code | Lenght (mm) | Face type | N (Clamps) | Clamp model | N (Stoppers) | Stopper model | N (Workpieces) | Max. area for parts (mm) | Dimensions | Step file (3D) |
| SRH-400-FS1S2 | 400 | Smooth | 1 | RHC-FS1 | 2 | RHS-S1 | 2 | 220 |  |
 |
| SRH-500-FS1S2 | 500 | Smooth | 1 | RHC-FS1 | 2 | RHS-S1 | 2 | 320 | |
|
| SRH-600-FS2S3 | 600 | Smooth | 2 | RHC-FS1 | 3 | RHS-S1 | 4 | 300 | |
|
| SRH-700-FS2S3 | 700 | Smooth | 2 | RHC-FS1 | 3 | RHS-S1 | 4 | 400 | |
|
| SRH-800-FS2S3 | 800 | Smooth | 2 | RHC-FS1 | 3 | RHS-S1 | 3 | 500 | |
|
| SRH-400-FR1R2 | 400 | Serrated | 1 | RHC-FR1 | 2 | RHS-R1 | 2 | 220 | |
|
| SRH-500-FR1R2 | 500 | Serrated | 1 | RHC-FR1 | 2 | RHS-R1 | 4 | 320 | |
|
| SRH-600-FR2R3 | 600 | Serrated | 2 | RHC-FR1 | 3 | RHS-R1 | 4 | 300 | |
|
| SRH-700-FR2R3 | 700 | Serrated | 2 | RHC-FR1 | 3 | RHS-R1 | 4 | 400 | |
|
| SRH-800-FR2R3 | 800 | Serrated | 2 | RHC-FR1 | 3 | RHS-R1 | 4 | 500 | |
|
Notes
- Nominal serration spacing is 2.50015 mm; for example, 200 serrations correspond to a nominal spacing of 500.030 mm. This value should be accounted for when programming stopper positions.
-
The first locator hole can be used as a reference point for positioning or CAM programming.
Configuration options
In addition to the predefined sets available on this product page, customized setups can be created by combining different modules from the Multi-Rail product family. This allows the rail configuration to be adapted to specific workpiece sizes and clamping requirements.
You can find all the Multi-Rail components from here
Contact us or your nearest distributor to discuss available options.
Request for more information
OK-VISE
Contact your distributor
"*" indicates required fields