- Accessories
- Accessories
- Modular workholding
- Multi-Rail RH
- Multi-Rail RM
Machining options
We have also some typical ways to modify our components.
In addition to options that help locate the components on a workholding platform, there are the following machining options that help to locate or clamp the workpiece.
Some examples are shown here.
OK-VISE has predefined all details of some of the machining options, whereas in some options places of pockets etc. can be specified by customer. In the latter case the delivery time is naturally starting from the mutual acceptance of the specification.
Details
| Type | Explanation |
| M-N1 | the widht of the upper part of the rail base is machined to 36 mm. |
| M6X4-1 | 4 pcs of M6 threads |
Examples :
M-N1
Machining of two sides with max 4×9 mm notch.
Then both stopper width and the width of the upper part of the rail base will be 36 mm.
M6X4-1
This set of threads (4 pcs of M6) is typically used with Multi-Rail RM stoppers, (in this case with RMS-S)
RMG-1 can be installed to the stopper instead of Multi-Rail base.
Request for more information
OK-VISE
Contact your distributor
"*" indicates required fields
Similar Products
Locating Keys
RH T-slot Adapter Sets
