Clamps with Machinable Jaws

Single-wedge clamps are also available with extended jaws and can be machined to suit the geometry of the workpiece. The smallest model can be machined up to 3 mm and the larger ones up to 5 mm.

BK2-VT+3

Files to download
Dimensions
STEP (3D)

The BK2-VT+3 comes with soft jaws (30-34 HRC) and can be machined to suit the geometry of the workpiece. In this model, each jaw is machinable up to 3 mm without weakening the structure of the jaw itself.

Applications

DK2-VT+5

Files to download
Dimensions
STEP (3D)

The DK2-VT+5 comes with soft jaws (30-34 HRC) and can be machined to suit the geometry of the workpiece. In this model, each jaw is machinable up to 5 mm without weakening the structure of the jaw itself.

The inch model code is DK2-VTI+5.

Applications

FK2-VT+5

Files to download
Dimensions
STEP (3D)

The FK2-VT+5 comes with soft jaws (30-34 HRC) and can be machined to suit the geometry of the workpiece. In this model, each jaw is machinable up to 5 mm without weakening the structure of the jaw itself.

Applications

 COMBO MODELS:  BK2-VT+3S  •  DK2-VT+5S  •  DK2-VTI+5S  •  FK2-VT+5S

Code	Dim.	STEP
BK2-VT+3S
DK2-VT+5S
FK2-VT+5S

These combo models come with one smooth, through-hardened jaw and another soft jaw (30-34 HRC) which can be machined to suit the geometry of the workpiece. The jaw is machinable from 3 - 5 mm without weakening the structure of the jaw itself.

xk2-vt-xs

MACHINED CROSS V MODELS:  BK2-VT-C  •  DK2-VT-C •  DK2-VTI-C  •  FK2-VT-C

Code	Dim.	STEP
BK2-VT-C
BK2-VT-CS
DK2-VT-C
DK2-VT-CS
FK2-VT-C
FK2-VT-CS

Low-profile clamps with cross V-slot (-C) are used for machining of the cylindrical workpieces.

These clamps allow to place workpieces in both the horizontal and vertical planes. 

Please note that also combo-models ( type -CS ) with one smooth jaw are available. These models come with code  xK2-VT-CS where x=size (B,D,F).

Applications