Clamps with grip jaw

These models are equipped with n hard steel pins (n = 1...3 pcs), which increases the friction between the workpiece and the jaw.

Clamps with code ending on Gn (e.g. DK2-VT-G2) contain n pieces of grip pins in both jaws. In clamps with code xK2-VT-RGn one jaw is serrated and hardened. Other jaw combinations are available upon request.

Code	Dim.	STEP
BK2-VT-G1
BK2-VT-G2
BK2-VT-G3
DK2-VT-G1
DK2-VT-G2
DK2-VT-G3
FK2-VT-G1
FK2-VT-G2
FK2-VT-G3
Combo models
BK2-VT-RG1
BK2-VT-RG2
BK2-VT-RG3
DK2-VT-RG1
DK2-VT-RG2
DK2-VT-RG3
FK2-VT-RG1
FK2-VT-RG2
FK2-VT-RG3

Clamp DK2-VT-RG3 (D-size with 3 grip pins in one jaw) is shown in the photo below.

Code	Dim.	STEP
BK2-VT-SG
DK2-VT-SG
BK2-VT-G
DK2-VT-G

This types of clamps posses one or two serrared knife edge jaws.

Types xK2-VT-SG - where x stands for the size have the other jaw smooth, whereas in types xK2-VT-G both jaws are same type.

This type of clamps posses two jaws with hard tungsten carbide coating.
When no clamping marks are allowed in the workpiece but still high friction is needed, these clamps are an excellent choise.
Or when thin-walled workpieces are being machined, these jaws create required holding force with less clampforce, preventing distorsions of the workpiece while clamping.